Fabrication of buried microfluidic channels with observation windows using femtosecond laser photoablation and parylene-C coating

We developed an advanced method for fabricating microfluidic structures comprising channels and inputs/outputs buried within a silicon wafer based on single level lithography. We etched trenches into a silicon substrate, covered these trenches with parylene-C, and selectively opened their bottoms using femtosecond laser photoablation, forming channels and inputs/outputs by isotropic etching of silicon by xenon difluoride vapors. We subsequently sealed the channels with a second parylene-C layer. Unlike in previously published works, this entire process is conducted at ambient temperature to allow for integration with complementary metal oxide semiconductor devices for smart readout electronics. We also demonstrated a method of chip cryo-cleaving with parylene presence that allows for monitoring of the process development. We also created an observation window for in situ visualization inside the opaque silicon substrate by forming a hole in the parylene layer at the silicon backside and with local silicon removal by xenon difluoride vapor etching. We verified the microfluidic chip performance by forming a segmented flow of a fluorescein solution in an oil stream. This proposed technique provides opportunities for forming simple microfluidic systems with buried channels at ambient temperature.     

A feasibility study of using CeO2 as a surrogate material during the investigation of UO2 thermal conductivity enhancement

A possible substitution of UO₂ for research purposes is the cerium dioxide (CeO₂) owing to its chemical and physical properties. Neutronic properties are different and fission is absent in the case of CeO₂; however, similarities were studied recently to have a possibility to compare the neutronic influence of secondary additives into the matrix. This paper deals with increasing the thermal conductivity of UO₂ nuclear fuel on surrogate material (CeO₂); the main focus of the research is given on the sintering behaviour of CeO₂. The incorporation of highly thermally conductive material (SiC) is the investigated concept of thermal conductivity enhancement. Conventional sintering and spark plasma sintering (SPS) were applied to compare the behaviour of CeO₂ and UO₂ reported in the literature. High temperature thermal conductivity measurements did not confirm the positive influence of SiC additive inside the CeO₂ matrix mainly due to grain boundary disruptions. Similar behaviour was also previously reported for UO₂ pellets with SiC.     

Devastation of the environment by landslides activated by construction

Summary The landscape environment is presently formed by the system in which there are natural, as well as anthropogeneous components. There is natural direct and inverse relation between them. The possibility and method of construction of a technical work depends on specific natural conditions. Of decisive influence are mainly the rock relief, groundwater and geodynamic processes, which Matula (1976) terms the main components of the engineering geological environment. The natural conditions of the West Carpathians are suitable for the occurrence and development of slope movements. More than 3% of the total Slovakian area is covered by landslides and by other slope movements of a varied degree of activity. Based on actual examples of an incorrect procedure in erecting some of the ground, hydrotechnical and transport constructions the paper analyzes the causes of landslide reactivation and devastation of the environment. To avoid negative changes in the geological environment engineering geological documents are prepared for more important investment units, comprising predictions of changes induced by construction.

---

Dégradation de l'environnement par la réactivation de glissements sous l'influence de constructions

Résumé Le paysage est le résultante de composants naturels, ainsi que d'influences anthropiques. Il y a un rapport mutuel direct et inverse entre ees facteurs. La possibilité de construire un ouvrage et les méthodes employées dépendent des conditions naturelles spécifiques. Les facteurs principaux sont la morphologie du site, l'eau souterraine et les phénomènes géodynamiques, que Matula M. (1976) appelle les composants principaux de l'environnement de la géologie de l'ingénieur. Les conditions naturelles des Carpates Occidentales se prêtent à l'apparition et au développement de mouvements de versants. Plus de 3% de la superficie totale de la Slovaquie sont concernés par des glissements et autres mouvements de versants d'une intensité variable. A partir d'exemples concrets de mauvaises réalisations de travaux souterrains, de barrages et d'infrastructures de transport, l'article analyse les causes de la réactivation des glissements et de la dégradation de l'environnement. Pour éviter ces influences négatives sur l'environnement géologique, on prépare des documents géologiques et géotechniques pour des travaux plus importants et qui incluent la prévision des changements provoqués par les constructions.

     

Uncertainties in determination of 131I activity in thyroid gland

The values of the iodine (131)I uptake determined from the measurements with a NaI scintillation counter might be significantly influenced by the thyroid position in the human neck. It is shown that the ratio of the counting rate in the energy peak of 364 keV to the counting rate in the Compton scattering band can be used for the determination of the effective depth of the thyroid. The uncertainties of the standard method are discussed basing on results of calibration measurements. The investigations of 95 patients with different thyroid diseases showed that the measured iodine spectrum was considerably different from the standard for about 20% of them, indicating possible high uncertainties of the standard measurements, which assume a fixed thyroid depth of 20 mm.     

Association studies on the porcine RETN, UCP1, UCP3 and ADRB3 genes polymorphism with fatness traits

Searching for effects of candidate gene polymorphisms on fatness traits is an important goal for pig industry. In this study we evaluated polymorphism of four porcine genes involved in energy metabolism (RETN, UCP1, UCP3 and ADRB3). Moreover, their association with fat deposition traits was analyzed in two breeds (Polish Landrace, Polish Large White) and a Polish synthetic line (L990). Altogether, five SNPs were identified, including two novel ones in the 5′-flanking region of the RETN gene and a novel missense substitution in the UCP3. Distribution of these polymorphisms in the studied five breeds and the synthetic line was not uniform. Two of the analyzed SNPs: g.−178G > A in the RETN and g.946C > T in the UCP3 gene revealed a significant association with abdominal fat weight or backfat thickness. Such associations were not observed for the UCP1 or ADRB3 gene polymorphisms. Our study showed that polymorphisms of the UCP3 and RETN genes are potentially associated with porcine fatness traits.     

Extrusion of polyethylene/polypropylene blends with microfibrillar‐phase morphology

Extrusion of immiscible polymers under special conditions can lead to creation of microfibrillar‐phase morphology, ensuring significant increase of mechanical properties of polymer profiles. Polyethylene/polypropylene blend extrudates with microfibrillar‐phase morphology (polypropylene microfibrils reinforcing polyethylene matrix phase) were prepared through continuous extrusion with semihyperbolic‐converging die enabling elongation and orientation of microfibrils in flow direction. Structure of extruded profiles was examined using electron microscopy and wide‐angle X‐ray scattering. Tensile tests proved that extrudates with microfibrillar‐phase morphology show significantly higher mechanical properties than the conventional extrudates. The presented concept offers possibility of replacing the existing expensive multi‐component medical devices with fully polymeric tools. POLYM. COMPOS., 31:1427–1433, 2010. © 2009 Society of Plastics Engineers     

Fire retardancy of sol–gel derived titania wood-inorganic composites

Sol–gel technology was applied in tailoring novel wood-made-inorganic composites with improved thermal and fire properties. In practice, composites materials were prepared by impregnating pine sapwood wood with nano-scaled precursor solutions derived from titanium(IV) isopropoxide followed by a thermal curing process. Thermal and fire properties were evaluated by thermal analysis and cone calorimetry, whereas flammability was specified by oxygen index (LOI) and UL 94 test. Peak heat release rates were moderately reduced indicating fire retardance potential in terms of flame spread attributed to the appropriate protection layer action of the titania-based depositions. LOI (oxygen index) values of these composites were increased up to 38 vol.% in comparison to 23 vol.% for untreated wood. The flame retardancy performance depends on the fire scenario and is strongly influenced by wood loading and crack-free deposition of the titania layers inside the composite.     

Microstructure and dislocation density evolutions in MgAlZn alloy processed by severe plastic deformation

Commercial MgAlZn alloy AZ31 was processed by hot extrusion and equal channel angular pressing (ECAP) known as EX-ECAP. Microstructure and defect structure evolution with strain due to ECAP were investigated by TEM, positron annihilation spectroscopy (PAS), and X-ray diffraction. Significant grain refinement was obtained by EX-ECAP. In the extruded condition relatively low density of dislocations was determined by PAS. Sharp increase of dislocation density occurred during the first two passes of ECAP, followed by the saturation and even a decline manifesting the dynamic recovery at higher strains. XRD line profile analysis confirmed the results of PAS with slightly higher values of dislocation densities in individual conditions. Detailed analysis of contrast factors allows to determine the type of dislocations and to draw conclusions about slip activation and its variations with strain. The influence of microstructure evolution on mechanical properties is discussed.